TIME UP AND GO TEST SERIES

Schematic Diagram of ETGUG testвЂ™s arrangementД«oth TGUG and ETGUG tests are performed among three groups such as healthy young individual, healthy elderly, and elderly who has a greater risk of falling.

As the subject passed the 2-meter mark when returning.ДЇigure 1.

As the subject passed the 8-meter mark when returning and.

As the subject passed the 8-meter mark.

As the subject passed the 2-meter mark.

The use of a multimemory stopwatch which has lap buttons should be pressed at the following event:

Every activity such as standing, gait initiation, walk 1, turning around, walk 2, slowing down phase, stopping, turning around, and sitting down should be recorded separately.

Ideally, the patient should walk parallel to the line at a normal pace.

Allow the patient to sit back on a standard armchair.

The patient is advised to wear their usual footwear and have a walking aid if necessary.

Measure and mark a 10-m walkway from the subjectвЂ™s legs of the straight-backed chair.

The chair used has no armrest with a sea elevation of approximately 46 cm. The basic procedure for TGUG is modified with different walkway measurements and stopwatches to monitor different activities. Although TGUG is reliable in determining balance assessment among elderly patients, it is substantial to isolate the areas of functional deficit to provide useful clinical information.ДЄ study on the timed get-up-and-go test is revisited by measuring its component tasks (Wall et al. This approach pinpoints the main area of the patientвЂ™s problem. In ETGUG, intensive time measurement is followed with respect to the component tasks. The assessment is usually scored automatically by the smartphone (GalГЎn-Mercant et al.

TIME UP AND GO TEST SERIES

In a more advanced version, the Expanded Timed Get-up-and-Go (ETGUG), all series of tasks such as seated position, walking, turning, stopping, and sitting down are measured separately using a multi-memory stopwatch as incorporated in the ConductScience Digital Health App. It was observed that older adults who finished the whole procedure in under 10 seconds had no balance deficiency while those who took more than 10 seconds had a high risk of falling. The entire procedure from standing up, walking, turning around, and then going back to the chair was timed. The use of a chair and stopwatch with a 3-meter walkway is necessary to perform the task. To improve and change the subjectivity of the вЂњGet-up-and-GoвЂќ (GUG) test, it was modified by the inclusion of time measurement for the entire procedure. In this version, an individual rises from a chair, walks at a 3-meter distance, turns around, returns, and sits back on the chair.

The вЂњGet-up-and-GoвЂќ (GUG) relied on subjective measurement because the performance was rated on a 5-point scale where 1 was normal, and 5 was strictly abnormal with a higher risk of falling. The Timed-Get-Up-and-Go (TUG) test is a modified version of the Get-up-and-Go (GUG) which was initially developed by Mathias et al. Most of the screening tools are developed to determine older patientsвЂ™ risk of falling. Many parameters are developed and devised to determine a patientвЂ™s balance assessment. The timed-get-up-and-go task is a widely used test to determine balance assessment. Balances, Scales and Weighing Equipment.

Time up and go test